Vintage Sansui Solid State Model 7000 Receiver - 70 Watts Per Channel

Description

Vintage Sansui Solid State Model 7000 Receiver - 70 Watts Per Channel
Fully tested and 100% functional; this vintage receiver was recently gone over by our tech.  His notes are below.
Cosmetically, it is overall very good for a 50 year old stereo.  There is some noticeable wear on the top of the face plate (see pics).  Also, the decal for the "Muting" switch is MIA.  The lighting for "Tuning" and "Signal" is a bit dimmer than the rest of the display.  Internally, these bulb housings had some build up we cleaned the best we could.  Otherwise, this classic is really nice.
Tech Notes -
Cleaned inside and out
Installed new LED lights
Cleaned all pots and switches with Deoxit
Specifications
Tuning range: FM, MW
Power output: 70 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 50kHz
Total harmonic distortion: 0.4%
Damping factor: 30
Input sensitivity: 4mV (mic), 2mV (MM), 200mV (DIN), 200mV (line)
Signal to noise ratio: 70dB (MM), 80dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 200mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 72 X transistors, 2 x FET, 1 x IC, 24 x diodes, 3 x zener diodes, 1 x SCR
Dimensions: 444 X 140 X 327mm
Weight: 15kg