MAX 8" Cutting Diameter PTO Power Feed Wood Chipper

Description

Short Description
1. 3 point hitch Attached Wood Chipper to your tractor
2. Removable Long safety kit with CE approval
3. Rotary Output Device for Waste
4. MAX 7.9 inch cutting Diameter
5. Easier to move because of the less weight
6. PTO Shaft inclueded
Description
WC-8 IS OUR BEST SELLING MECHANICAL POWER FEED WOOD CHIPPER. THIS
MACHINE OFFERS LARGE CAPACITY CAPABILITY. THIS IS GREAT CHIPPER FOR THE SMALL OR
LARGE CLEANUP JOB. THIS CHIPPER OFFERS A POWER-FEED ROLLER . THE WC-8
PRO ALSO
FEATURES A HORIZONTAL IN-FEED BIN WHICH MAKES LOADING MATERIAL INTO IT LESS
PHYSICALLY DEMANDING THAN OUR PINCH & PULL SELF FEED CHIPPERS.
Be it pruning’s, wind fall, branches to small for firewood, construction scrap or whatever the source, now you can chip wood as easily as you burn. Plus you can chip when you cannot burn.
We call it Pro because it offers several new features that improve on an already great design and make it more suitable for the home owner with a subcompact or compact tractor . We have redesigned the flywheel housing to allow full access with the removal of one bolt. We have added feed guides on each side of the power feed roller to improve the feeding of small diameter material and to reduce small material from catching on the sides of the roller. We have added material Feed Edge guides to the roller for the same reason. We have reduced the rotor mass to 137 lbs so less powerful tractors can power the flywheel and have the advantages of a proven power feed design. We have made the pressure on the feed roller adjustable. We have redesigned the stand to include an adjustable base that lowers the chipper.
Infeed Opening
The opening in the flywheel housing is a large 8"*8" square making it quite easy to accept branches with several limbs. This reduces the need to trim your branches down before down before feeding them into the chipper.
Flywheel
The dynamically balanced 24" diameter, 1" thick solid steel flywheel runs on a 2" diameter shaft and is supported by 2 industrial and greaseable flanged bearings. It features four CNC machined pockets to hold the reversible blades. The flywheel features four large fan blade paddles that spin at over 1,100 RPM ensuring maximum airflow.
Drive Belt System
The drive belt system is encased by a quarter inch thick steel guard which can quickly be rotated forward to access the drive system. Simply pull the pin at the top and the guard folds forward, providing quick and complete access to the entire drive system. The PTO shaft (included with chipper) connects from your tractor to the chippers lower 2" shaft. Four heavy duty cogged BX series drive belts run up to the flywheel main shaft. These belts are standard off the shelf replacement parts. They are automatically kept in proper tension via the self tensioning system. This system dramatically increases belt life, reduces belt slippage and saves the user from manually adjusting for belt tension. Changing belts are also made easy as the tensioning system can easily be pulled back out of the way allowing the belts to be changed out quickly.
Discharge chute
The discharge chute was designed to rotate 360 degrees by simply rotating it with the two handles to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. The end of the chute stands at 79" (2.0m) off of the ground, making it quite easy to direct the wood chips into the back of a truck or trailer if desired. Located at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground or into a trailer.
PTO Shaft
Included with the WC8 chipper is the PTO shaft complete with a shear pin.
More Photos
Technical Details
DIMENSIONS (L×W×H)
63*40*55 inch
RADIUS OF BLADE DISC
11.89 inch
STRUCTURE WEIGHT
816lb
CHIPPING DIAMETER
7.87inch
WORKING EFFICIENCY
8-9m³/h
PTO TURNNING SPEED
540r/min
PTO SPLINE
0.24*0.24*20.47inch
POWER REQUIREMENT
25-45hp
Additional Information